News

Company News

Trade News

News

Unveiling the Essentials of Cemented Carbide

Unveiling the Essentials of Cemented Carbide

Time 2023-12-21 13:30

National standard for cemented carbide balls

National standard for cemented carbide balls

Tolerance classes and technical requirements

Time 2023-04-25 10:15

How to choose tungsten carbide steel strip

How to choose tungsten carbide steel strip

Cemented carbide strip is a kind of cemented carbide shape, because of its shape for the long strip and named "cemented carbide strip". Also known as "hard alloy square bar", "tungsten steel strip", "tungsten steel strip" and so on. Hard alloy strip is mainly suitable for the production of all kinds of hard alloy tools, such as hard alloy woodworking tools, hard alloy knife, but also because of its high hardness and good wear resistance, it is often used for the production of high wear resistant parts of precision machinery, instruments. Because of its high hardness, good bending strength and acid and alkali resistance, it is widely used in national production and has made a great contribution to the construction of national production.

Time 2023-04-25 10:15

Domestic carbide tool products should not blindly follow the trend

Domestic carbide tool products should not blindly follow the trend

Due to the lack of independent innovation of domestic carbide tool enterprises, in the face of market transformation lack of patience for basic research, always have a wait-and - see mentality, only other enterprises to develop new products, to enjoy the benefits of a simple analysis, slightly adjusted to the finished product, blindly follow the trend to the market, completely ignore market saturation and enterprise needs.

Time 2023-04-25 10:15

Precautions for using hard alloy (tungsten steel)

Precautions for using hard alloy (tungsten steel)

The surface state of tungsten steel has great influence on its bending strength. In the process of manufacturing tungsten steel tools, it is necessary to prevent all kinds of cracks on the surface, otherwise the bending strength of tungsten steel will be greatly affected.

Time 2023-04-25 10:15

Machinery industry characteristics

Machinery industry characteristics

At present, many machinery and equipment industries only understand the promotion method of bidding ranking, and understand little about other promotion methods. The cost of bidding promotion is very high, coupled with the rapid rise of enterprise labor costs, enterprise promotion costs will continue to soar.

Time 2023-04-25 10:15

Analysis of demand status and development trend of cemented carbide industry

Analysis of demand status and development trend of cemented carbide industry

Hard alloy is a kind of alloy material made of hard compound of refractory metal and bonding metal by powder metallurgy process. Cemented carbide products are mainly tungsten carbide as hard phase, cobalt as bonding phase, by ball grinding, spray granization, pressing, sintering, with high hardness, strength, wear resistance and corrosion resistance, cemented carbide known as "industrial teeth", mainly used in cutting tools, stamping tools, molds, mining and road construction machinery and other fields.

Time 2023-04-25 10:15

Mechanical equipment manufacturing solutions

Mechanical equipment manufacturing solutions

According to the characteristics of machinery and equipment manufacturing industry to provide machinery and equipment manufacturing MES solutions, including: Business modules such as production planning scheduling, process management, data collection, workshop site management, product tracking/logistics, quality control and analysis, equipment management and personnel management are seamlessly connected with ERP to realize real-time collection and response of workshop production data, completely solve the problem of workshop information is not smooth and difficult to control, and greatly improve the production plan implementation rate. And shorten the production cycle, improve capacity.

Time 2023-04-25 10:15

Mechanical equipment industry how to get customers, what are the promotion methods, what are the advantages

Mechanical equipment industry how to get customers, what are the promotion methods, what are the advantages

Influenced by the Internet + way of thinking, nowadays all fields are exploring marketing channels according to the Internet technology. The construction of Internet sales websites is also a new way for many companies to explore and have already done. Mechanical equipment products as a traditional large field, the traditional operation mode is based on the manufacturer and regional agent as the leading secondary market sales and after-sales management system, trying to get the closed-loop control of marketing promotion according to the development and design of regional agents.

Time 2023-04-25 10:15

Mechanical design experience sharing and industry trends

Mechanical design experience sharing and industry trends

At present, under the constantly advancing situation of science and technology, our industrial enterprises have developed rapidly, and corresponding industrial machinery technology has also made great progress. The scientific and technological development becomes an important guarantee for the steady improvement of our industrial efficiency.

Time 2023-04-25 10:15

< 12 > proceed page

Unveiling the Essentials of Cemented Carbide

National standard for cemented carbide balls

Tolerance classes and technical requirements

How to choose tungsten carbide steel strip

Cemented carbide strip is a kind of cemented carbide shape, because of its shape for the long strip and named "cemented carbide strip". Also known as "hard alloy square bar", "tungsten steel strip", "tungsten steel strip" and so on. Hard alloy strip is mainly suitable for the production of all kinds of hard alloy tools, such as hard alloy woodworking tools, hard alloy knife, but also because of its high hardness and good wear resistance, it is often used for the production of high wear resistant parts of precision machinery, instruments. Because of its high hardness, good bending strength and acid and alkali resistance, it is widely used in national production and has made a great contribution to the construction of national production.

Domestic carbide tool products should not blindly follow the trend

Due to the lack of independent innovation of domestic carbide tool enterprises, in the face of market transformation lack of patience for basic research, always have a wait-and - see mentality, only other enterprises to develop new products, to enjoy the benefits of a simple analysis, slightly adjusted to the finished product, blindly follow the trend to the market, completely ignore market saturation and enterprise needs.

Precautions for using hard alloy (tungsten steel)

The surface state of tungsten steel has great influence on its bending strength. In the process of manufacturing tungsten steel tools, it is necessary to prevent all kinds of cracks on the surface, otherwise the bending strength of tungsten steel will be greatly affected.

Machinery industry characteristics

At present, many machinery and equipment industries only understand the promotion method of bidding ranking, and understand little about other promotion methods. The cost of bidding promotion is very high, coupled with the rapid rise of enterprise labor costs, enterprise promotion costs will continue to soar.

Analysis of demand status and development trend of cemented carbide industry

Hard alloy is a kind of alloy material made of hard compound of refractory metal and bonding metal by powder metallurgy process. Cemented carbide products are mainly tungsten carbide as hard phase, cobalt as bonding phase, by ball grinding, spray granization, pressing, sintering, with high hardness, strength, wear resistance and corrosion resistance, cemented carbide known as "industrial teeth", mainly used in cutting tools, stamping tools, molds, mining and road construction machinery and other fields.

Mechanical equipment manufacturing solutions

According to the characteristics of machinery and equipment manufacturing industry to provide machinery and equipment manufacturing MES solutions, including: Business modules such as production planning scheduling, process management, data collection, workshop site management, product tracking/logistics, quality control and analysis, equipment management and personnel management are seamlessly connected with ERP to realize real-time collection and response of workshop production data, completely solve the problem of workshop information is not smooth and difficult to control, and greatly improve the production plan implementation rate. And shorten the production cycle, improve capacity.

Contact

Address: No. 46 Shuyan Street, Ziliujing District, Zigong City, Sichuan Province

Contact Person: Vantasy Peng ( Sales Manager)

WeChat/WhatsApp: +86 19946896735

Inquiry Email：vantasypeng@zgyncc.com

VK account: @yinuocarbide_vantasy

COPYRIGHT © 2023 ZIGONG GIANT INDUSTRIAL TECHNOLOGY CO., LTD.  ALL RIGHTS RESERVED. POWER BY：300.CN · CHENGDU

SAF Coolest v1.2 设置面板MGZSX-ZFZJ-ASZWE-ZQE

修改浏览器滑块样式： 4px,4px,var(--c)
营业执照及SEO链接： License

无数据提示

Sorry，当前栏目暂无内容！

您可以查看其他栏目或返回 首页

SVG图标库请自行添加图标，用div包起来，并命名使用